CAL FIRE Single-Layer Pants

CrewBoss is proud to be an approved supplier of CAL FIRE’s new single-layer wildland pants. Available in Uniform and Tactical styles these dual-compliant garments will allow CAL FIRE personnel to respond to wildland calls directly from the station without changing, and improve firefighter performance by significantly decreasing heat stress in the field.

Call for pricing and additional information.

 
CALFIRE_Tactical.jpg

CAL FIRE Tactical Pant

From the Station to the Fireline, the CAL FIRE Tactical Pant is designed to offer the best in protection and breathability. Certified to both NFPA 1977 and 1975, this pant combines a modernized station wear look, with the wildland functionality that you would expect from a CrewBoss Brush Pant. 

  • Front stave closure with locking zipper fly closure.

  • Two front slash pockets.

  • Two tactical cargo pockets with bartacked flap closure.

  • Two rear welt pockets. 

  • Gusseted crotch.

  • Seven oversized belt loops to accommodate a 2in belt.

  • Articulated knees for ease of movement

  • Slips easily in and out of turnout gear

  • Available in Midnight Navy

  • Part # SWP4624


 
CALFire_Uniform.jpg

CAL FIRE Work Uniform Pant

The CAL FIRE Work Uniform Pant combines professional style with wildland functionality. Dual Compliant Pants allow for faster response times to wildland fires by removing the need for turnout pants, wildland overpants, or a change into wildland specific PPE.

  • Front stave closure with locking zipper fly closure.

  • Two front slash pockets.

  • Two rear welt pockets. 

  • Seven oversized belt loops to accommodate a 2in belt.

  • Silicon crease for professional appearance

  • Slips easily in and out of turnout gear

  • Available in Midnight Navy

  • Part # SWP4424


Cal Fire Interim Spec

The Cal Fire Spec was created to produce better THL performance while enhancing the over all TPP. The new spec utilizes several performance fabrics to increase protection and breathability, while maintaining a RPP (radiant protective performance) of 10. Certified to NFPA 1977, this light weight garment is a unique interface design approved by Cal Fire.

Cal Fire Jacket Features

  • Patch Pocket located on the front right panel chest area with hook and loop flap closure

  • Tapered radio pocket located on the front left panel chest area with a hook and loop flap closure

  • 2” Reflective triple trim double needle stitched around sleeve

  • 2” Reflective triple trim double needle stitched around front and back panels

  • Hook and loop cuff tabs 2” up from the sleeve hem

  • Two fabric design - lightweight body for THL performance, sleeves constructed of heavier fabric for enhanced TPP (single layer, no liner)

  • Stand up style collar with hook and loop closure

  • The hanger loop located at the inside center back of the coat below the collar

  • The Microphone Tab shall be located on the Front Left Panel shoulder area above the Radio Pocket

  • Zippered front closure mounted on Nomex tape and stitched to prevent direct contact with the body

  • Made with multiple TenCate fabrics to achieve Cal Fire spec


Cal Fire Pant Features

  • 2” Triple Trim Reflective double needle stitched 7” up from the pant cuffs

  • Hook and Loop straps with D-rings to secure the bottom of the pant cuffs

  • Articulated, pleated knee reinforcements double stitched and bartacked to the front panel of the pants

  • Double stitched front and back crotch reinforcement

  • Two semi bellow Cargo Pockets with spade style Flaps with hook and loop closure shall be located at the thighs

  • Two Slash Pocket entries with spade style Flaps with hook and loop closure located at the hips

  • Zippered leg closure mounted on Nomex tape and sewn to not come in contact with the body as specified in NFPA1977-2011

  • 3” Double bartacked belt loops

  • 2” Waist band with elastic sewn into the pant along the back panel